Sign In | Join Free | My
China Guangzhou Yousu Plastic Technology Co., LIMITED logo
Guangzhou Yousu Plastic Technology Co., LIMITED
Guangzhou Yousu Plastic Technology Co., LIMITED
Active Member

7 Years

Home > 3mm 3D Printer Filament >

PETG 3.0mm Blue with 3d printing filament for 3d filaments makebot

PETG 3.0mm Blue with 3d printing filament for 3d filaments makebot

Brand Name : YouSu

Model Number : PETG-B-3.0-1.0

Certification : CE,ROHS, FCC

Place of Origin : China

MOQ : 1pcs

Price : negotiation

Payment Terms : Paypal, TT, Western Union

Supply Ability : 60 tons/month

Delivery Time : 5-10 days

Packaging Details : Vacuum sealed with desiccant, individual box. Can be customization.

Material : PETG

Diameter : 3.0

Color : Blue

Certificate : MSDS,ROHS

Advantages : high toughness.

Print temperature : 210 - 260℃

Contact Now

PETG 3.0mm Blue with 3d printing filament for 3d filaments makebot

Quick Detail:


3D printer filament of Nylon






1kg (2.2lb)/spool

Support machine





Print temperature: 210 - 260℃
filament net weight: 1kg
(1) high strength, good toughness;
(2) softer than PLA;
(3) diameter of3.0mm, variations + /-0.1mm,roundness +/-0.03mm;
(4) cost-effective, can be processed in wide range temperature;
(5) 1 kg /plastic spool packaging, can be automatic feed;
(6) to be applied to a variety of 3D printer, Makerbot, Mendel, Prusa, Huxley, BFB series, etc..
(7)density is small, when printing larger volume model lighter, save money;







White/Red/Yellow etc.

Filament diameter




Print temperature

210 - 260 celsius

Spool capacity

1kg(Can be customization)


How to get a perfect printing model?

In fact you want to get a perfect printing model, you need a reliable printer with the 3D printer at right temperature under right parameter setting. It means that your printer should under good condition, your filament should be good enough. The following tips are based on this question.

Tip 1: What is your idea printing temperature?

In fact different printer series and different printer sensor has different temperature tolerance. Regardless sensor difference, the printing temperature of REPRAPPER ABS filament is 200~260, the idea temperature is 230. Different color has little variance. The printing temperature of REPRAPPER PLA filament is 170~240, the idea temperature is 210. Different color has little variance.
For UP and Afinia printer, you can use it directly under ABS or PLA mode (Depends on what material you bought). For Makerbot etc printer that allows you change the temperature, you can set a temperature (e.g. 230), then extrude the filament manually before printing. If you saw the filament can flow up smoothly without bubble, it means that temperature is ideal setting.

Tips 2 How to avoid printing parts tilt?

It is very important for the first layer. You want to get a successful printing model you need to assure the platform is leverage. If the platform is not leverage the probability of tilt will increase. Before you begin your job you need to confirm the nozzle to all platform distance is the same.
The filament can be stick on ABS board/ solderless breadboard/3M blue tape/Kapton tape etc.
When you printing, the closer between nozzle to platform the better but should not break the platform.

Tips 3. How to avoid printing failure?

Before you begin your job, you need to confirm:
1) The filament is good, no clog and with consistence diameter. Wired well.
2) The filament feed system can feed the filament smoothly to avoid lack of filament in the extruder during printing.

During printing you need to confirm:

1) The temperature is ideal and the extruded filament at nozzle is smoothly without bubble.
2) The first layer is OK as mentioned above.
If you avoid these issue but your still print failure parts, it may caused by your printer’s reliability. According our experience, the distinguish of a good printer or bad printer is their reliability. For FDM mode printer, for one or two model, all printing results is similar regard the surface. But when print 100 times will them success 100 times is the make difference point. er are competitive. For example, for Z axis movement, if your setting is 0.2mm, will they move 0.2mm exactly? If higher than 0.2mm the extruded filament may not stick to the near bottom printing model. If less than 0.2mm it may make the nozzle touch the printed model. Both of that will cause failure printing.

Product Tags:

3d printing material


3d printer Plastic Material

Cheap PETG 3.0mm Blue with 3d printing filament for 3d filaments makebot for sale

PETG 3.0mm Blue with 3d printing filament for 3d filaments makebot Images

Inquiry Cart 0
Send your message to this supplier
*To: Guangzhou Yousu Plastic Technology Co., LIMITED
Characters Remaining: (0/3000)